BondTAC S-1430

WATERPROOF ELASTOMERIC MEMBRANE

DESCRIPTION

BondTAC S-1430 is a waterproof elastomeric adhesive membrane, specially designed for use on rigid polystyrene insulation.

FEATURES & BENEFITS

  • Safe on polystyrene foam board
  • Fast Cure
  • Fire Resistant
  • Waterproof - Repels Water!
  • Resistant to mold, fungus & bacterial growth
  • Sticks to virtually any surface
  • Excellent adhesion & aggressive Tack
  • Easily applied at normal & low temperatures
  • Flexible - will not crack or peel
  • Paintable - can be used under water-based decorative paint finishes. Not to be used with oil-based paints

COMPLIANCE & PERFORMANCE

  • ASTM E 96-05 - STANDARD TEST METHODS FOR WATER VAPOR TRANSMISSION OF MATERIALS
  • ASTM C 1306-08 - STANDARD TEST METHOD FOR HYDROSTATIC PRESSURE RESISTANCE OF A LIQUID-APPLIED WATERPROOFING MEMBRANE
  • CAN/ULC-S102 - STANDARD METHOD OF TEST FOR SURFACE BURNING CHARACTERISTICS OF BUILDING MATERIALS AND ASSEMBLIES

WHERE TO USE

BondTACT S-1430 will adhere building components to virtually any surface, including rigid polystyrene insulation, where it provides a protective, waterproof barrier. Use S-1430 on exterior and interior concrete and concrete block walls to protect from moisture and water infiltration where exterior application is not readily accessible. Surface must be dry at time of application. BondTAC must penetrate a dry, porous surface in order to prevent further moisture and water infiltration.

This product's adhesive characteristics make it to suitable to adhere rigid polystyrene insulation (such as XPS) to sheathing boards and other substrates.

Materials and components applied to Bondtac coated surfaces will adhere instantly and permanently. BondTACT 800S Diluent and Surface Lubricant will permit adjustments to attain the proper fit of components and boards. Allow a minimum of one hour drying time after application of BondTACT S-1430, and then apply a sparing coat of BondTACT 800S to the surface of the BondTACT S-1430, using a brush or paint roller. Slide and fit the board or component into place within five minutes of BondTACT 800S application.

Apply BondTACT S-1430 to all interior and exterior sheathing boards, including gypsum wall board, glass-mat sheathing, Dens Glass, masonry, concrete, wood, fiberglass, metal surfaces, roofing components and shingles, window and door framing and sills to produce a water & vapour barrier.

It may be used as an excellent primer for self-adhered air and vapour barrier systems, components and membranes over porous and non-porous substrates. Provides an excellent crack isolation barrier for shower enclosures, shower pans and tub surrounds.

BondTACT S-1430 will adhere most construction materials to virtually any substrate. This includes, but is not limited to, laps of polyethylene sheets, EPS & XPS foamboard, housewraps, ICF, wood, metal and gypsum board.

BondTACT S-1430 may also be used as a corrosion protective primer for all metal components, fasteners, sheet metal, etc. In applications where a topcoat finish is desirable, any protective coating may be used with the following exceptions: Oil-based enamels and varnishes are not suitable for use with BondtacT waterproofing products.

APPLICATION INSTRUCTIONS

WARNING! EXTREMELY FLAMMABLE! VAPOURS MAY IGNITE EXPLOSIVELY! VAPOURS HARMFUL! MAY IRRITATE EYES AND SKIN! USE ONLY IN WELL VENTILATED CONDITIONS! KEEP OUT OF REACH OF CHILDREN!

Open all windows and doors to prevent buildup of vapours. Keep away from heat, sparks or open flame. Do not smoke. Extinguish all flames and pilot lights. Turn off stoves, heaters, electric motors and other sources of ignition during use and until all vapours are gone. Do not use in areas where static electrical sparks may be generated. Keep container tightly closed when not in use. Store in a cool, dry place.

Surfaces to be coated must be sound and clean, dry and free from dust, dirt, grease oil and other foreign matter. Apply the coating with a roller or brush. Surfaces coated with BondTACT S-1430 can be bonded as soon as 1 hour and up to 96 hours later. BondTACT cures within 24 to 72 hours. Final bond strength is achieved in approximately 1 week. Coated surfaces must be kept free of dust, dirt and foreign matter. Can be applied over wide temperature ranges.

PACKAGING

Available in 5-gallon (18.9L) pails, 1-gallon (3.785L) cans and 1-quart (946ml)

CLEAN UP

Use BondTAC 800 Diluent & Solvent Cleaner when necessary, to thin the coating, to clean tools and clean up spills and remove excess product.

PRODUCT PROPERTIES

Non-Volatiles 43%
Consistency Mobile Liquid
Specific Gravity 0.83 (@ 26C)
Tack-up Time 1 Hour
Coverage 225 – 500 sq. ft. per gallon (depending on the porosity and texture of the
application surface)

WARRANTY

Before using, the user shall determine the suitability of the product for its intended use and the user alone assumes all risks and liabilities whatsoever in connection therewith. Bondtac Technologies Incorporated assumes no responsibility for personal injury or property damage to vendees or users or third parties, caused by the improper use of this product. Such vendees or users assume all risks with the use of the material.

Download

Download BondTac S-1430 MSDS Specs

  View Product Demos

Click here to view Product demos